INSTRUMENTS AND CONTROLS 2. FUEL CUT-OFF SWITCH 3. ENGINE LOW IDLING SELECTOR SWITCH 4. HAZARD LAMP SWITCH ON \ “., Engine fuel consumption will be cut. When using APS (automatic priming system) in cold weather, use when starting. OFF: Fuel is not supplied to the engine. ON: Fuel is supplied to the engine. When hand is removed from OFF position, switch returns to ON position. For detailed method of usage, refer to “starting in cold weather”. The engine low idling speed can be switched between two levels. @ ON: The engine low idling speed is set to approx. 950 rpm. This is used on busy jobsites where it is necessary to reduce the cycle time. @ OFF:
This switch is used in emergen- cies, such as when the machine breaks down. ON: All turn signal lamps flash. * All turn signal lamps and pilot lamp on the steering column flash. A Do not use this switch unless abnormality is occured. This sets the engine low idling speed to approx. 650 rpm. This is used for normal operations at low idling. -24- W-03678