INSTRUMENTS AND CONTROLS 3. DIRECTIONAL LEVER 4. SPEED CONTROL LEVER 5. SPEED CONTROL LEVER STOPPER 4th This lever is used to change the direction of travel of the machine. This lever controls the travel speed of machine. This machine has a 4- FORWARD, 4-REVERSE speed transmission. Place the speed con- trol lever in a suitable position to This stopper prevents the speed control lever from entering the 3rd and 4th positions, when working. Position @ Forward Reverse Neutral g 0 Stopper actuated. Position @I * obtain the desired speed range. 1 st and 2nd speeds are used for working. Stopper released. The engine cannot be started if the directional lever is not at N (neutral).
* When operating the directional lever, place your hand on a steer- ing wheel and operate it by your fingers. 3rd and 4th speeds are used for traveling. - 32 -