CHECK BEFORE STARTING e. CHECK FUEL LEVEL AND REFILL FUEL Engine stoppe ing engine or 15 minutes or more Make an oil level check beforestart- The gauge is stamped with EN- GINE STOPPED and ENGINE (G) on the monitor panel. Checkthefuel level usingfuel gauge after the engine is stopped. If oil remains at various portions of Checking the oil level with the IDLING. addition fuel from filler(F) until the Upon completion of work, pour in the engine, the correct oil level engine idling may be allowed, if fuel tank is full. cannot be measured. When checking oil level, park the the following precautions are thor- oughly satisfied: the engine.
machine on level ground and stop Check that the engine water tem- peraturegaugeshowsgreen range. mark. Do not add oil above the H level ii) Remove the oil filler cap. iii)Read the dipstick on its reverse While adding oil, take out the oil side when it is stamped, “ENGINE guide to bleed the air from the level gauge through the gauge IDLING.” crankcase. - 47 -