. SAFETY SAFETY MACHINE OPERATION OPERATION that the forward to avoid in the on the operator's door and be 2 - 23 CHECKS BEFORE OPERA When carrying out the ch slowly. Do not allow anyon Always fasten your sea Check that the moveme nt of the machine matches the display o n the contr ol pattern card. If it do es not match replace it immediately w ith the correct control pattern c Check the operation of the work equipment, traval syst em and swing syste Check for any problem i n the sound of the machine, vib ration, heat, smell, o r gauges ; check also th at there is no leakage of oil or fuel.
If any problem is found, SAFETY RULES FOR CHANGING MACHINE DIRECTIONS Before traveling, position the upper structure so t Before traveling, posit sprocket is at the rear o f the operator's cab. If the sproc the front of the operator' s cab, the machine makes a mo reverse to the control l ever movement (for example, becomes reverse, and l eft becomes right). Be careful nt of the machine. k again that there is no one hat there are no obstacles. the horn to warn people in the such a reverse moveme Before travelling, chec surrounding area, and t Before travelling, sound Always operate the mac hine only when seated. part from the operator to ride arm works properly.
r and windows of the op (open or closed). Do not allow anyone a machine. Check that the travel al Always lock the doo compartment in position On jobsites where there is a hazard of flying objects or of entering the operator's compartment, check that the d losed. e rear of the machine which ca windows are securely c If there is an area to th seen, position a signal p erson. Take special care not to machines or people wh en turning or swinging the mach