MAINTENANCE PRIOR TO START 24.4 ENGINE, DRAINING OFF OIL If you have topped off too much oil, you must drain off the excess oil. Have an oil trough with a sufficient capacity ready. 1 - Loosen the screw (1) at the bottom cover plate (2) and swiv- el the cover plate to the side. 2 - Put the oil trough to pan. 3 - Remove the cover cap (3) of the drain screw. 4 - Unscrew the drain screw (4). 5 - Let the excess oil flow off. 6 - Screw in the drain screw. 7 - Check the oil level again. 8 - Put on the cover cap. 9 - Fasten the bottom cover plate with the screw. 1 2 75_207 143