TECHNICAL DATA 33.3 LIMIT VALUES FOR SLOPES 33.3.1 MAXIMUM SLOPE ANGLE FOR OPERATING THE MACHINE If operating the machine on a slope, its angle must not exceed 30° uphill, downhill or sideways. If you angle the machine at more than 30° during operation, the motor, transmission, hydraulic system or axles, will not be sup- plied with sufficient oil and can be damaged. A uphill 30° B downhill 30° C sideways 30° 33.3.2 TILTING/TIPPING ANGLE The tilting/tipping angle is a calculated value. It represents the angle at which the machine at rest can stand on a slope without tipping over.
You must not work with the machine in positions exceeding these angles as the en- gine, transmission, hydraulic system or axles, will not be supplied with sufficient oil and can be damaged. A uphill with workload 54° uphill without workload 33° B downhill with workload 39° downhill without workload 55.5° C sideways with workload 40.5° sideways without workload 39° 75_046 182