113 SEAT SWIVEL AND BASE 1 107-528 1 PN10 SLOTTED NUT 2 106-522 1 WASHER (2-1/16") REF NO. PART NUMBER QTY DESCRIPTION REMARKS SEE FOOTNOTE 2 3 106-385 1 FLG LOCKNUT (M6-1.00) 4 308-895 1 LEVER 5 110-178 2 PLUG (7/8") 6 306-844 1 SEAT BASE 300-8537 1 SEAT BASE FOR HT115 322-986 1 SEAT BASE FOR TIER 2 RT90 & RT115 324-729 1 SEAT BASE SEE FOOTNOTE 4 FOR INSTR. & BEG.
S/N; FOOTNOTE 5 7 106-992 9 FLG LK SCREW (M8-1.25 X 25mm) SEE FOOTNOTE 1 SEE FOOTNOTE 1 9 117-816 1 COMPRESSION SPRING 8 107-135 13 CLIP NUT (M8-1.25) 10 179-382 1 SHIM (.020) 11 115-662 1 GROMMET EDGE (3/16" X 12.7") 12 110-383 1 KNOB (3/8-NC, BLACK) 13 308-879 1 SWIVEL 14 106-559 1 SCREW (M12-1.75 X 25mm) 15 117-301 1 SWIVEL DISK (7" UHMW) 16 107-582 1 SHLD BOLT (3/8" X 1/4", 5/16-NC) SEE FOOTNOTE 3 SEE FOOTNOTE 1 17 115-645 1 COMPRESSION SPRING 19 106-986 1 FLG LK SCREW (M6-1.00 X 12mm) 18 106-121 1 STUD BOLT (3/8-NC X 1-1/2") 20 107-606 1 TANG LOCK WASHER (2") 21 105-095 1 WASHER (1/4") 22 300-8446 1 ACCESS PANEL SEE FOOTNOTE 4 FOR INSTR. & BEG. S/N; FOOTNOTE 5 NOT SHOWN: FOOTNOTES: 1.
USE LOCTITE 242 OR EQUIVALENT 2. TORQUE SPANNER NUT TO PREVENT ROTATION, THEN REVERSE DIRECTION AND LOOSEN 1/8 OF A TURN. 3. NO LUBRICANT ON ITEM #15 4. SEAT BASE 300-8537, ACCESS PANEL 300-8446 MUST BE USED TOGETHER. BEGINS WITH SERIAL NUMBERS; RT95ME90000274 RT95HJ90000351 RT115T3T90000125. 5. USE 2X 106-264 FOR RETAINING 300-8446 TO 300-8537 IF WELDNUTS ARE PRESENT. BEGINS WITH SERIAL NUMBERS; RT95HP90000380 RT95ME90000291 R15T3L90000135. NOTE: 13 ID0034153