87 FENDERS AND COVERS REF NO. PART NUMBER QTY DESCRIPTION REMARKS 1. 306-492 1 REAR PANEL 323-977 1 REAR PANEL ASSY USED WITH A/C OR HEATER KIT 2. 306-491 1 LEFT FENDER 3. 306-490 1 RIGHT FENDER 4. 305-657 1 RIGHT OUTSIDE FENDER 5. 305-656 1 LEFT OUTSIDE FENDER 6. 308-897 2 PANEL 7. 250-622 1 MANUAL COMPARTMENT 8. 318-793 1 FLOOR PLATE 9. 107-461 1 LOCKING LATCH 10. 120-085 4 ADJUSTABLE LOUVER (23-0005) USED WITH A/C OR HEATER KIT 11. 107-778 26 SCREW (M8-1.25 X 30mm, BUT SOC) 12. 107-135 38 CLIP NUT (M8-1.25) SEE FOOTNOTE 3 13. 306-796 2 TAB 14. 309-816 2 STRAP 16. 106-992 14 FLG LK SCREW (M8-1.25 X 25mm) 17. 307-644 1 COVER 15. 217-762 1 ROCKER SWITCH (SPDT) USED WITH AXLE LOCK 18.
107-358 8 WELLNUT (M4-0.7) 19. 107-580 8 SCREW (M4-0.70 X 16mm,BUT SOC) 20. 107-629 43 WASHER (M8) 21. 110-348 3 POP RIVET (3/16" X .664") 23. 106-574 5 CLIP NUT (M6-1.00) 22. 105-1549 7 SCREW (M6-1.00 X 20MM) 25. 309-434 6 TAB 24. 306-795 1 TAB 27. 362-823 4 COVER 26. 107-096 9 LOCKNUT (M8-1.25, NLK) SEE FOOTNOTE 5 28. 117-360 2 GRAB HANDLE 29. 309-847 1 FUEL SENDER COVER 31. 120-084 4 HOSE ADAPTER (23-0048) 32. 120-123 1 HOSE ADAPTER (23-0090) 30. 106-155 20 SCREW (#4-40 X 5/8", PAN PLPS) USED WITH A/C OR HEATER KIT USED WITH A/C OR HEATER KIT USED WITH A/C OR HEATER KIT 33. 106-989 4 FLG LK SCREW (M8-1.25 X 35mm) 34. 106-724 2 FLG SCREW (M10-1.50 X 25mm) 35.
105-894 2 LOCKNUT(M10-1.50,PRV TRQ,10.9) USED WITH FRAME TILT OPTION 38. 217-764 1 ROCKER SWITCH (SPDT) 37. 217-194 10 MICRO RELAY BASE 36. 316-945 1 RELAY MOUNT SEE FOOTNOTE 1 40. 107-744 4 WASHER (M6) 41. 106-388 7 WASHER (M6) SEE FOOTNOTE 2 39. 157-333 1 HOLE PLUG (.750") 42. 217-072 1 ROCKER SWITCH 43. 217-817 1 ROCKER SWITCH (SEALED) SEE FOOTNOTE 4 & 5 SEE FOOTNOTE 4 & 5 44. 110-854 4 SWITCH ACTUATOR GUARD USED WITH AXLE LOCK AND REAR STEER OPTION SEE FOOTNOTE 5 45. 165-817 2 SWITCH GASKET SEE FOOTNOTE 4 & 5 46. 107-312 4 SREW (M6-1.00X25MM, BUT SOC) SEE FOOTNOTE 4 47. 107-871 4 WELLNUT (M6-1.00 X 20.35MM LG) SEE FOOTNOTE 4 48. 300-9262 1 SWITCH MOUNT SEE FOOTNOTE 4 49.
106-163 22 FLG SCREW (M8-1.25 X 30MM) 1. THIS IS TO BE USED FOR MECHANICAL (POWERSHIFT ONLY) FOOTNOTES 2. USE LOCTITE 401 ADHESIVE 3. USE LOCTITE 242 OR EQUIVALENT 4. USE WITH REAR STEER SYSTEM. 5. UNITS WITHOUT REAR STEER, FRAME TILT, OR REEL WINDER USE PLUGS 362-823. 05 NOTE: ID0024294