. OPERATION DETAILED CONTROLS AND GAUGES Gauges and Meter 3 - 18 Engine Coolant Temperature Gauge engine cooling water temperature. This meter (7) indicates the engine cooling water temperatur During normal operations, the indicator should be in the b lack range. If the indicator enter s the red range during operations , the overheat prevention system is actuated. (A) - (B): Red range (A) - (C): Black range The overheat prevention sy stem acts as follows. gine water temperature monitor (D) lights up red. Red range position (A) : En gine water temperature monitor ( D) lights up red. Red range position (B) :
En gine speed is reduced to low idling , engin e water temperatu re monitor (D) lights u p red, and the alarm buzzer sounds at sam e time. The overheat prevention sy stem remains actuated until the in dicator returns to t he bla When the engine is started, engine water temperature m In this case, carry out the w arming-up operation. For details, see "Engin e Warm Up (P Fuel Gauge of fuel in the fuel tank. ator should be in the black range. If Meter (8) displays the level During operations, the indic indicator enters red range (A ) during operations, there is less than 125 liters (33.03 US gal) of add fuel. (A) - (B): Red range (A) - (C):
Black range fuel remaining in the tank, check and and REMARK When the indicator reaches red range (B), there is less than 106 emaining. red range (B), fuel level monitor (D) liters (22.19 US gal) of fuel r When the indicator is in the lights up red. If the indicator enters the re d range (A) to (B), do not carry ou t operation s on steep slo pes. Ther e is danger of the engine stalling. The correct fuel level may n ot be displayed for a short time w hen t he starting switch is t urned ON, but this is n ot an abnormality.