. OPERATION DETAILED CONTROLS AND GAUGES Fuel Control Dial Dial (2) adjusts the engine speed and output. (a)Low idling (MIN): Turned fully to the left (b)Full speed (MAX): Turned fully to the right (a) ON: Lamps light up (b) OFF: Lamps go off 3 - 35 Starting Switch to start or stop the engine. r withdrawn. Switches for the electrical Starting switch (1) is used (A): OFF position The key can be inserted o system (except room lam stopped. (B): ON position p), are all turned off and the engine is is Electric current flows throu gh the charging and lamp circuits. Keep starting switch key in the O N position while the engine is running. (C): START position This is the engine-start p osition.
Keep the key at this position during cranking. Immediate ly after starting the engine, release the key. It will automatically re turn to the ON position (B). REMARK When the fuel control dial is turned, the engine speed does not not change for the first few not ches from MIN and the last few notches before MAX, but this does not indicate any abnormality. Cigarette Lighter igarettes. Lighter (3) is used to light c To use, push the lighter in. After a few seconds it will spring back. Pull out the lighter and ligh t your cigarette. lighter, the socket is available as a w flashing lamp. x 3.5 A). By removing the cigarette power source for the yello Max.
current is 85 W (24V Lamp Switch Switch (4) is used to tur n on the front lamps, working lamps, amps, additional lamp at top front of the cab, and monitor lighting.