Basic components EMU26382 Top cowling lock lever (pull up type) To remove the engine top cowling, pull up the lock lever(s) and lift off the cowling. When installing the cowling, check to be sure it fits properly in the rubber seal. Then lock the cowling by moving the lever(s) down- ward. 3 1 2 B A ZMU02525 1 1. Trim tab 2. Bolt 3. Cap ZMU03904 1. Top cowling lock lever(s) A B ZMU01863 1 EMU26340 Tilt support lever for power trim and tilt or hydro tilt model To keep the outboard motor in the tilted up position, lock the tilt support lever to the clamp bracket. ZMU03905 1.
Top cowling lock lever(s) 1 EMU26460 Flushing device This device is used to clean the cooling wa- ter passages of the motor using a garden hose and tap water. NOTE: For details on usage, see page 43. ZMU03979 1. Tilt support lever 16