General Information 00 Lubrication and Fluid Level Check: 00–06 Table 8 summarizes all operations that must be per- formed to complete Lubrication and Fluid Level Check Operation 00–06 called for as an M1 mainte- nance interval for Service Schedule I and II vehicles. Maintenance operation numbers given in the table are reference numbers used to help you find detailed instructions in the manual on the lubrication or fluid checking. Maintenance Operation 00–06, Lubrication and Fluid Level Check for Service Maintenance Operation No.
Operation Description Check 25–01 Clutch Release Bearing Lubrication * 25–02 Clutch Release Cross-Shaft Lubrication 25–03 Sleeve Assembly Bronze Bushing Lubrication 25–04 Fluid Level Check, Hydraulic Clutch Control 26–01 Transmission Fluid Level Inspection 31–02 Fifth Wheel Lubrication 31–05 Trailer Electrical Connector Lubrication 32–02 Suspension Lubrication 33–01 Knuckle Pin Lubrication 33–02 Tie Rod Lubrication 33–04 Front Axle Wheel Bearing Lubrication 33–05 Front Drive Axle Lubricant Level Check 35–01 Drive Axle Lubricant Level Check 41–02 Driveline Lubrication 42–05 Camshaft Bracket Lubrication 42–06 Slack Adjuster Lubrication 46–02 Drag Link Lubrication 46–04 Power Steering Fluid Level Inspection 46–05 Power Steering Gear Lubrication 46–06 Steering Shaft Lubrication 72–01 Door Seal, Door Latch, and Door Hinge Lubrication * For Eaton Easy Pedal Advantage clutches, the interval is 50,000 miles (161 000 km) for linehaul applications.
For Detroit axles, complete this procedure once a year or at the following applicable interval, whichever comes first: every 5000 miles (8000 km) for Schedule I vehicles; or every 100,000 miles (161 000 km) for Schedule II vehicles. Table 8, Maintenance Operation 00-06, Lubrication and Fluid Level Check for Service Schedules I and II 88–01 Hood Rear Support Lubrication Western Star Maintenance Manual, September 2015 00/11