16 ENGINE REF NO. PART NUMBER QTY DESCRIPTION REMARKS 29. 165-883 1 GASKET, THERMOSTAT 30. 164-027 1 THERMOSTAT HOUSING 31. 153-993 1 GASKET, THERMOSTAT TUBE 28. 110-259 2 BOLT-ON CLAMP (.625") 33. 213-081 1 COOLANT TEMPERATURE SENSOR 34. 213-082 1 ENGINE HEAD TEMPERATURE SENSOR 32. 155-705 1 O-RING (906 D90) 35. 194-027 1 MUFFLER CLAMP (4.143") 36. 106-932 1 SCREW (M8-1.25 X 45MM) 37. 107-096 1 LOCKNUT (M8-1.25, NLK) NOT SHOWN: FOOTNOTES: 1. TORQUE CROSSBOLT TO 85-90 FT LB; MOUNT FLUSH WITH END OF SHAFT 2. RE-INSTALL GASKET FROM COVER PLATE. 3. ONTHE BACK OF THE PUMP OF SOME EARLY MACHINES A DIFFERENT MOUNT PAD WAS USED.
IF THE BOLT HOLDING THE PAD TO THE PUMP HAVE A WASHER UNDER THE BOLT HEAD USE O-RING 157-201 BETWEEN THE PUMPS. NOTE: REFER TO O-RING CHART (800-301) IN BACK OFTHE BOOK FOR REPLACEMENT OF O-RINGS. 13 ID0025782