Komatsu Trolley Dump Truck Operation & Maintenance Manual (EN)

COVER

CEAM020701 Operation & Maintenance Manual Trolley DUMP TRUCK SERIAL NUMBERS A30431, A30432, A30460, A30461, A30463, A30464, & A30467 - A30469 ®

Стр. 1

COVER

This material is proprietary to Komatsu America Corp (KAC), and is not to be reproduced, used, or disclosed except in accordance with written autho- rization from KAC. It is the policy of the Company to improve products whenever it is possible and practical to do so. The Company reserves the right to make changes or add improvements at any time without incurring any obligation to install such changes on products sold previously. Because of continuous research and development, periodic revisions may be made to this publication. Customers should contact their local Komatsu dis- tributor for information on the latest revision. Unsafe use of this machine may cause serious injury or death.

Operators and maintenance personnel must read and understand this manual before operating or maintaining this machine. This manual should be kept in or near the machine for reference, and periodically reviewed by all per- sonnel who will come into contact with it. CALIFORNIA Proposition 65 Warning Diesel engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

CALIFORNIA Proposition 65 Warning Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. CALIFORNIA Proposition 65 Warning Mercury and mercury compounds are known to the State of California to cause developmental prob- lems. This machine may be equipped with optional HID lamps which contain mercury. There is no risk of exposure unless the lamps are broken. However, the lamps must be reused, recycled or properly disposed of in accordance with Local, State and Federal Laws at the end of their useful lives.

Стр. 3

COVER

NON-OEM PARTS IN CRITICAL SYSTEMS For safety reasons, Komatsu America Corp. strongly recommends against the use of non-OEM replacement parts in critical systems of all Komatsu equipment. Critical systems include but are not limited to steering, braking and operator safety sys- tems. Replacement parts manufactured and supplied by unauthorized sources may not be designed, manufactured or assembled to Komatsu's design specifications; accord- ingly, use of such parts may compromise the safe operation of Komatsu products and place the operator and others in danger should the part fail. Komatsu is also aware of repair companies that will rework or modify an OEM part for reuse in critical systems.

Komatsu does not generally authorize such repairs or modifications for the same reasons as noted above. Use of non-OEM parts places full responsibility for the safe performance of the Kom- atsu product on the supplier and user. Komatsu will not in any case accept responsi- bility for the failure or performance of non-OEM parts in its products, including any damages or personal injury resulting from such use.

Стр. 4

FOREWORD

OM1060 05/08 Introduction - Section 10 Page 10-1 INTRODUCTION FOREWORD This manual is written for use by the operator and/or the service technician. It is designed to help these persons to become fully knowledgeable of the truck and all its systems in order to keep it operating safely and efficiently. All operators and maintenance personnel must read and understand the materials in this manual before operating the truck or performing maintenance and/or operational checks on the truck. All safety notices, warnings, and cautions must be understood and followed when operating or repairing the truck.

A product identification plate is located on the frame in front of the right side front wheel and designates the truck model number, product identification number (vehicle serial number), and maximum GVW (Gross Vehicle Weight) rating. The Komatsu truck model designation consists of three numbers and one letter (i.e. 930E). The three numbers represent the basic truck model. The letter E, when present, designates an electrical wheel motor drive system. The product identification number (vehicle serial number) contains information which will identify the original manu- facturing bill of material for this unit.

This complete number will be necessary for proper ordering of many service parts and/or warranty consideration. The GVW is what determines the load on the drive train, frame, tires, and other components. The vehicle design and application guidelines are sensitive to the total maximum Gross Vehicle Weight (GVW). GVW is total weight: the empty vehicle weight + the fuel and lubricants + the payload. To determine allowable payload, fill all lubricants and fuel tank to the proper level. Weigh the truck and record this value. Subtract it from the GVW to determine the allowable payload. NOTE: Accumulations of mud, frozen material, etc., become part of the GVW and reduces allowable payload.

To maximize payload and to keep from exceeding the GVW rating, these accumulations must be removed as often as practical. Exceeding the allowable payload will reduce the expected life of truck components.

Стр. 5