Lubrication & Maintenance/500 Hour/12 Month Checking Belt Tensioner Spring Tension and Belt Wear (Automatic Tensioner) Belt drive systems equipped with automatic (spring) belt tensioners cannot be adjusted or repaired. The automatic belt tensioner is designed to maintain proper belt tension over the life of the belt. If tensioner spring tension is not within specification, replace tensioner assembly. OURGP11,0000150 –19–06JAN04–1/3 Checking Belt Wear The belt tensioner is designed to operate within the limit of arm movement provided by the cast stops (A and B) when correct belt length and geometry is used. Visually inspect cast stops (A and B) on belt tensioner assembly.
RG8098 –UN–18NOV97 If the tensioner stop on swing arm (A) is hitting the fixed stop (B), check mounting brackets (alternator, belt tensioner, idler pulley, etc.) and the belt length. Replace belt as needed ( see REPLACING FAN AND ALTERNATOR BELTS in Service As Required Section). Cast Stops A—Cast Stops B—Cast Stop Continued on next page OURGP11,0000150 –19–06JAN04–2/3 30-14 021604 PN=151