Instrument Panel - Elect. Cont. Earlier Engines Instrument Panel This instrument panel for earlier P OWER T ECH 4.5 L and 6.8 L electronically controlled engines is electronically linked to the John Deere engine control unit (ECU). This allows the operator to monitor engine performance as well as to diagnose any troubles during engine operation. All electronic engine controls are optional equipment for John Deere P OWER T ECH OEM Engines. These electronic controls may be provided by the equipment manufacturer instead of purchased from John Deere. Refer to your engine application manual for specific guidelines if John Deere sourced controls and instrumentation are not used.
A—Engine Oil Pressure Gauge B—Amber “WARNING” Indicator C—Red “STOP ENGINE” Indicator D—Diagnostic Gauge/Hour Meter E—Touch Switch F—Touch Switch G—Audible Alarm (Optional) H—Audible Alarm Override Switch (Optional) I—Analog Throttle Control (Optional) J—Dimmer Control (Optional) K—Engine Preheater Indicator (Optional) L—Key Start Switch M—Override Shutdown Rocker Switch N—High-Low Speed Select Rocker Switch O—Bump Speed Enable Rocker Switch P—Speed Select Rocker Switch Q—Fuse Holder (5-Amp Fuse) R—Tachometer S—Power Meter (Percent Load) (Optional) T—Voltmeter (Optional) U—Engine Coolant Temperature Gauge RG11169 –UN–01NOV00 Instrument Panel (Earlier Electronically Controlled Engines) P OWER T ECH is a trademark of Deere & Company.
Continued on next page OURGP11,000027A –19–25NOV03–1/7 16-1 021604 PN=47