Instrument Panel - Elect. Cont. Earlier Engines Changing Units of Measure (English or Metric) RG10018 –19–28OCT99 Changing Units Of Measure The diagnostic gauge can display engine data in either English or Metric units. To toggle between these, the Units Sub-Menu, must be selected. diagram shows the steps for selecting the desired units of measure. Two options are available: 1. Press both the switches to retain the current units designation. 2. Press either UP or DOWN switch to toggle the units selection, then press both switches to select the desired unit of measure. To select the Units Sub-Menu, press the UP or DOWN switch until the top line of the display reads “Units”.
Then press BOTH the UP and DOWN switches at the same time to select the Units Sub-Menu. The above DPSG,OUOD007,2842 –19–21OCT99–1/1 16-12 021604 PN=58