Cab Appearance Cab Washing and Polishing and tree sap before waxing. Freightliner recom- mends that a quality brand of cleaner or cleaner- polish and polishing wax be used. To protect the finish of your new vehicle, follow these guidelines carefully: Do not let diesel fuel or antifreeze stand on a painted surface. If either should occur, rinse the surface off with water. During the first 30 days, rinse your vehicle fre- quently with water. If the vehicle is dirty, use a mild liquid soap. Do not use detergent. To prevent rust, have any nicks or other damage on the finish touched up as soon as possible. During the first 30 days, do not use anything abrasive on your vehicle.
Brushes, chemicals, and cleaners may scratch the finish. Park your vehicle in a sheltered area whenever possible. During the first 120 days, do not wax your ve- hicle. Care of Chromed Parts and Stainless-Steel Clad Parts To extend the life of your vehicle’s finish, follow these guidelines: Avoid washing your vehicle in the hot sun. To prevent rust, keep chrome and stainless-steel clad parts clean and protected at all times. This is especially important during winter driving and in coastal areas where there is exposure to salt air. Always use water. After the cab is completely washed, dry it with a towel or chamois. Do not dust painted surfaces with a dry cloth, as this will scratch the paint.
When cleaning chrome or stainless-steel clad parts, use clean water and a soft cloth or sponge. A mild detergent may also be used. Do not remove ice or snow from a painted sur- face with a scraper of any sort. Sponge gently, then rinse. If necessary, use a nonabra- sive chrome cleaner to remove stubborn rust or other material. Do not use steel wool. To prevent damage to the finish, wax it regularly. Before waxing, if the finish has become dull, re- move oxidized paint using a cleaner specifically designed for this purpose. Remove all road tar 8.1