CONTROLS - Truck Information treat trips separate from each other, or as segments of a combined trip. Trip Idle Fuel Used Trip Idle Percent Used (%) PTO Total Hours PTO Trip Hours PTO Trip Percentage (%) PTO Total Fuel Used PTO Trip Fuel Used PTO Trip Economy The cluster mounted trip reset button is used to zero and clear accumulated trip data. Short presses toggle between the odometer view, and the four trips. Holding the button when on a particular trip will zero the stored data and also automatically set the cleared trip to “active” status. Using the knob while in this screen will only activate or deactivate a trip function.
Truck Information This function displays the VIN specific information. This information is available when the vehicle is parked. Trip Info: Avg = 58 mph 6.8 MPG 3 _ Avg + Truck Info: Chassis 12:39 PM 78 F 25,326 Mi ABS Trans Engine When driving, the screen only allows you to toggle which trip is viewed in the trip odometer and set the active/inactive status. When parked you can select and view a variety of data collected for each trip, as seen in the list below: Trip Economy Trip Average Speed Trip Engine Hours Trip Fuel Used Time in Cruise Control (%) Time in Sweetspot (%) Time in Overspeed (%) Trip Idle Hours Trip Idle Percentage (%) 12:39 PM 78 F 25,326 Mi 1.
Chassis Information Chassis Number Fleet ID CECU Software Version No. 2. Engine Information Engine Make Engine Model Engine Software Version Governed Speed Limit Engine Power 3. Transmission Information NOTE PTO options in the display will only be shown if the vehicle is equipped with a PTO. Y53-6047-2HEN (03/18) 71