PRECAUTIONS TO BE TAKEN DURING MAINTENANCE 7.6 RUNNING THE ENGINE DURING MAINTENANCE Only run the engine during maintenance work when absolutely necessary. If the engine must be run (e.g. to flush out the cooling circuit or check the alternator) ensure that an operator remains in the driving seat to switch off the engine whenever necessary. During maintenance work, if the engine is running, never disengage the control locks, and never move the track drive levers. Maintenance personnel should never move control levers. When performing maintenance, never touch moving parts and never wear large, loose garments.
7.7 RULES FOR REFUELLING AND ADDING OIL Splashes of fuel or oil can cause a person to slip and are therefore hazards. Mop up spillages immediately and clean the area affected. Keep the filler caps of the fuel tank and hydrau- lic fluid tank firmly tightened down. Never use fuel to clean parts of the machine which are smeared with oil or dust. Only add fuel or hydraulic fluid in well ventilated areas, and refrain from smoking while doing so. S00002 S00003 23