GENERAL / Tightening PERIODIC REPLACEMENT OF PARTS 1. Periodic Replacement Parts (1) (Safety Inspection Object) In order to ensure safe operation, the users must conduct daily checking before starting operation and periodic inspection of the machine by law. In order to ensure safe operation, conduct periodic replacement of the security parts below. 1. Theses parts deteriorate, fatigue and weaken with time. As it is very difficult to gauge extent of the damaged parts according to periodic inspection, replace them with the new ones regardless of defect in the interval. 2. If any of these parts are found to be defective regardless of the interval, repair or replace these parts.
W1-2-9 Replacement Parts Name Replacement Intervals Replacement Cause Engine Fuel tank Hose Every 2 years Fire breaking may occur because of fuel leakage. Brake system Brake valve Seals (rubber) Every 1 year If oil leakage occurs when traveling, the machine cannot be controlled. Wet-type brake D-ring in piston Every 4 years Brake pipe Hose Every 2 years Stop Lamp Switch Every 2 years Accumulator Accumulator (3 used) Every 2 years Steering system Steering pipe Hose Every 2 years If oil leakage occurs, the steering cannot be controlled. Steering cylinder Seals (rubber) Every 4 years Steering valve Seals (rubber) Every 2 years