Wheels and tires Chassis Large tires The dimensional design of the Arocs model 964 allows for tire sizes up to 12.00 R24. For this reason the front axle has been moved 100 mm further back than on model 963, and the vehicle overhang at the front has therefore increased to 1500 mm (= 750 mm front frame overhang). Because of this, there is no additional code for relocation of the front axle. Accordingly, the wheelbases on model 964 are 100 mm shorter than on model 963. Vehicle adapted for large tires (R0V) When 14.00 R20, 325/95 R24 or 12.00 R24 are fit- ted, the distance between the two rear axles is increased by 100 mm to 1450 mm.
The 1st rear axle is 50 mm further forward, and the 2nd rear axle 50 mm further back. The result is a wheelbase and frame overhang that is 50 mm shorter in real terms. The front axle interval and the front overhang are identical with large and regular tires. W40.10-1024-00 A Vehicle with standard tires B Vehicle with large tires X Wheelbase Single tires on the rear axle Specifically for weight-optimized vehicles (Loaders) with 6x4 and 8x4 axle configurations, single tires on the rear axle are available in the sizes 385/55 R 22.5 (I2N) and 385/65 R 22.5 (I2Q). Single tires can only be fitted in combination with the option rear axle, ring gear 390, hypoid, 9.5 t, single (A2O).
W40.10-1025-00 59 i Introduction of the New Truck Generation - The New Arocs (Model 964) – This printout will not be recorded by the update service. Status: 01 / 2013 –