Cab Body General The S, M, and L cabs introduced with the new Actros and Antos will also be available for the Arocs, with the exception of the GigaSpace and CompactSpace L cabs. The cabs differ from the long-haul and distribution models in terms of: Unique radiator grille design ("excavator teeth") Mirror covers Movable cab entry step Plastic components in the interior in anthracite color with easy-to-clean surfaces The cabs are installed at different body floor heights depending on the conditions of service, the engine variants and the drive components (all-wheel drive).
The body floor height of 765 mm produces a flat floor on in the long cab; with medium and short cabs the tunnel height is 170mm. With a body floor height of 600 mm the tunnel height can be 170 mm and 320 mm (e.g. in the all-wheel drive vehicles). W00.00-1073-00 Radiator grille with excavator tooth design Mirror cover, construction vehicle (F0Y) The mirror cover for construction vehicles (F0Y) is standard equipment on the new Arocs. W88.70-1037-00 Mirror cover, construction vehicle (F0Y) 65 Introduction of the New Truck Generation - The New Arocs (Model 964) i – This printout will not be recorded by the update service. Status: 01 / 2013 –