OPERATING THE ENGINE 14 3. Place the shift levers in "NEUTRAL" position. 5. Set the throttle lever to about 1/2 way . (1) Hydraulic-shuttle shift lever (2) Main gear shift lever (N) "NEUTRAL POSITION " (1) Hand throttle lever (2) Foot throttle "INCREASE" "DECREASE" 6. Insert the key into the key switch and turn it "ON". 4 . Place the PTO clutch control switch in "OFF" position and hydraulic control levers in "LOWEST" position. "OFF" (Engine-Stop) "ON" (Engine-Run) (1) PTO clutch control switch (2) Position control lever (3) Draft control lever "ON" "OFF" (A) "DOWN" ACC Electrical Power-accessories "START" (Engine-Start) NOTE: ACC... A The accessories can be used while the engine is stopped.
A Do not leave the key at "ACC" position. The battery will be quickly discharged. Turn it back to "OFF" after use.