Scania engines engine warranty for industrial engines 11. Miscellaneous items used in the above sys- tem: Receipts covering the performance of regular maintenance should be retained in the event questions arise concerning maintenance. The re- ceipts should be transferred to each subsequent owner of the engine with the emission warranted engine. Scania cannot, however, deny warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled main- tenance. a) Electronic control unit (ECU), sensors, wiring harnesses. b) Hoses, belts, connectors, assemblies, clamps, fittings tubing, sealing gaskets or devices and mounting hardware.
c) Pulleys, belts and idlers. d) Emission control information label. IMPORTANT! The Warranty covers the cost of diagnosis, repair and replacement parts and services of warranted components and systems performed by an au- thorized Scania distributor or dealer using genu- ine Scania parts. You may elect to have maintenance, replacement or repair of these components and systems performed by any re- pair establishment or individual without invali- dating the Warranty. This list does not include all expendable mainte- nance parts. Expendable emission related parts requiring scheduled maintenance are warranted until their first scheduled replacement point.
Emission related parts scheduled for inspec- tion and replacement only as necessary are not considered expendable and if repaired or replaced under warranty shall be warranted for the remaining warranty period. The use of other than Scania replacement parts also does not invalidate the warranty on other components unless such parts cause damage to warranted parts. However, the cost of such ser- vices or parts will not be covered by the Warran- ty. See Specific Warranty Exclusions below. You are responsible for initiating the warranty process.
The California Air Resources Board suggests that You present your heavy-duty off- road engine to an authorized Scania dealer as soon as a problem exists. The warranty repairs should be completed by the dealer as expedi- tiously as possible. General warranty limitations To retain the dependability of the exhaust emis- sion control originally built into your Scania in- dustrial diesel engine, it is essential that the engine is installed according to Scania installa- tion instructions and emission certificates. Your engine is designed to operate on diesel fuel only. Use of any other fuel may result in your engine no longer operating in compliance with state or federal emissions requirements.
The use of alter- native fuels shall not void the warranties on any engine certified to use such fuel. WARNING! Use of replacement parts which are not of equiv- alent quality may impair the effectiveness of emission control systems. Accordingly, it is rec- ommended that only Scania repair or replace- ment parts be used for maintenance, repair or replacement of emission control systems. In addition, as the engine owner, You are respon- sible for the performance of all scheduled main- tenance listed in your owner's manual, and all necessary repairs, on your new Scania industrial diesel engine.
Scania may deny a warranty claim if the engine or part has failed due to abuse, ne- glect, improper maintenance or unapproved modifications. If other than Scania parts are used for mainte- nance, repair or replacement, the owner should obtain assurance that such parts are warranted by their manufacturer to be equivalent to genuine Scania parts. OPM 100 en-GB 14 © Scania CV AB 2015, Sweden