Unit :
mm(in.) G424 Service Manual Specifications 16 Item Standard value Limit Remarks Starter motor Nominal output, kW 1.2 No-load characterstics Voltage, V 11.0 Current, A 90 or less Speed, rpm 3000 Commutator Outer diameter 29.4 (1.16) 28.8 (1.13) Runout 0.05 (0.0020) 0.1 (0.0039) Undercut 0.5 (0.020) 0.2 (0.008) Pinion gap 0.5 to 2.0 (0.020 to 0.079) Brush length Wear limit line Distributor Centrifugal advance crank angle/engine speed, °/rpm Start 0°/1000 End 20°/5000 Vacuum advance crank angle/vacuum, °/mmHg End 0°/80 Start 23°/280 Ignitio n coil Primary coil resistance, Ω 1.08 to 1.32 Secondary coil resistance, Ω 22.1 to 29.9 Spark plug Plug gap 0.7 to 0.8 (0.028 to 0.031) Tahermostat Valve opening temperature, °C (˚F) 82 (180) Fully opening temperature, ˚C (˚F) 95 (203) Valve lift 8 (0.31) or more Oil Pressure Low Idle 50 kPa(7psi) High Idle 450 kPa(65psi)