OWNER 爷 S MANUAL JAC HEAVY DUTY TRUCK HEADLIGHT SWITCH PASSING SWITCH To operate the headlights, turn the barrel on the end of the multifunction The headlights will be flashed when the lever is pushed upward and release switch. The first position turns on the parking lights, sidelights, taillights and automatically. The headlights can be flashed even though the headlight switch instrument panel lights. The second position turns on the headlights. is in the "OFF' position. WINDSHIELD WIPER High-beam and Low-beam The windshield wiper switch has three positions: To turn on the headlight high beams, push the lever upward. For low beams, pull the lever down.
The appropriate headlight beam indicator light will come INT: Intermittent wiper operation LO : Low-speed operation on at the same time. HI : High-speed operation NOTE: NOTE: This function is operated when the headlight switch is in the "ON" position. To prevent damage to the wiper system, do not attempt to wipe away heavy accumulations of snow or ice. Accumulated snow and ice should be removed manually, If there is only a light layer of snow or ice, operate the heater in the defrost mode to melt the snow or ice before using the wiper. 38 39