OPERATION 3.2 CONSTRUCTION OF THE SHOVEL Legend for illustration Z25531 C Top View of Operator’s Cab (1) Co-driver’s seat, refer to page 64 for more information (2) Windshield washer reservoir, refer to page 61 for more infor- mation. (3) Washbasin with water tap (4) Refrigerator box (5) Portable fire extinguisher located behind the Operator’s seat. Make sure the fire extinguisher is always charged and ready for use. (6) Heater unit located in the seat base (7) Lock lever. This lever locks the controls for working equipment, swing and travel drive when placed in the fully rear posi- tion (L). Start the engine with lock lever in LOCKED position (L).
Thereafter set the lock lever to free position (F) in order to enable operation of the hydraulic control system. Before leaving the operator’s cab set the lock lever to LOCK position (L). If the controls are not locked, and they are touched inadvertently, this may lead to a seri- ous accident. (8) Instrument panel, see page 81 for more information. (9) Monitor of the V ehicle H ealth M onitoring S ystem -VHMS- , see page 90 for more information.
(10) Pedal for closing the bottom dump bucket (Face shovel only) (11) Pedal for opening the bottom dump bucket (Face shovel only) (12) Travel control pedal, left track forward - reverse (13) Travel control pedal, right track forward - reverse (14) Swing brake pedal 59 WARNING WARNING