OPERATING THE VEHICLE 18 B Work Light (Front) [if equipped] When the key switch is turned to the "ON" position and the front work light switch is turned to the "ON" position, the work light comes on. 5. Adjust mirror position. Adjust the mirror position so that the operator can see the rear end of cargo bed. (1) Front work light (if equipped) (2) Front work light switch (if equipped) (A) "ON" (B) "OFF" (1) Mirror (A) Rear end of cargo bed B Work Light (Rear) [if equipped] When the key switch is turned to the "ON" position and the slide switch at the rear of each work light is slid to the "ON" position, the work light comes on.
When the slide switch is slid to the "OFF" position, the light goes off. After the slide switch for each work light is shifted to the "OFF" position, turn the key switch to the "OFF" position. 6. Checking the brake pedal. B Brake Pedal To avoid serious injury or death: A If the operator suddenly brakes, an accident may occur due to loss of control or the shifting forward of heavy loads. A When driving on icy, wet or loose surface, operate at reduced speed to avoid skidding and loss of steering control. The brake pedal is the left pedal on the foot board. Depress the pedal to slow or stop the vehicle.
(1) Rear work light (if equipped) (2) Rear work light switch (if equipped) (A) "ON" (B) "OFF" (1) Brake pedal