MACHINE OPERATIONS AND CONTROLS OPERATION Moving Machine Backward 0. 1. Set safety lock lever (2) to the FREE position, then raise the work equipment 40 to 50 cm (1.6 to 2.0 in) from the ground. 2. Raise the blade. 3. Operate right and left travel control levers (3) or right and left travel pedals (4) in the following manner. When sprocket is situated at the rear of the machine; Start the machine either by pulling lever (3) back slowly or by stepping on the rear part of pedal (4) slowly. When sprocket (A) is situated at the front of the machine; Start the machine either by pushing lever (3) forward slowly or by stepping on the front part of pedal (4) slowly. 4.
When travel accelerator pedal (5) is depressed, the speed will increase. For details on speed, see "SPECIFICATIONS ( 5-2 )". Check that the travel alarm sounds. If the travel alarm does not sound, please contact your Komatsu distributor for repairs. 3-54