MACHINE OPERATIONS AND CONTROLS OPERATION STEERING THE MACHINE 0. Steering 0. Before operating the travel levers, check the position of the sprocket. If the sprocket is at the front, the operation of the travel levers is reversed. Use the travel levers to change direction. Avoid sudden changes of direction as far as possible. In partic- ular, when carrying out counter-rotation (spin turn), stop the machine first before turning. Operate two travel levers (1) as follows. Steering the Machine when Stopped 0. When turning to the left: Push the right travel lever forward to turn to the left when trav- eling forward; and pull it back to turn left when traveling in reverse.
REMARK When turning to the right, operate the left travel lever in the same way. 3-56 WARNING