MACHINE OPERATIONS AND CONTROLS OPERATION 2. When traveling up a steep hill of more than 15", set the work equipment to the posture shown in the diagram on the right. Traveling Downhill 0. To brake the machine during downhill runs, put the travel lever in the neutral position. This will cause the brake to be automatically applied. Engine Stopped on Slope 0. If the engine stops when traveling uphill, move the travel levers to the neutral position, stop the machine, then start the engine again. Cab Doors on Slope 0. Do not open or close the sliding door (cab specifications) on slopes when traveling or operating. The operating effort may change suddenly. Always keep the sliding door locked.
Be extremely careful when opening or closing the sliding doors (cab specifications) when the machine is stopped on a slope. There is danger that the weight of the door may cause it to open or close suddenly. 3-66