OPERATION TRANSPORTATION 7. Stop the machine at the specified place, then swing the upper structure slowly 180є. 8. Stop the machine at the specified position on the trailer. Securing Machine 0. After placing the machine on the specified position of the trailer, secure it according to the following procedure. NOTICE To prevent damage to the bucket cylinder during transpor- tation, fit a wooden block at one end of the bucket cylinder to prevent it from touching the floor. 1. Lower the blade. 2. Extend the bucket and arm cylinders fully, then lower the boom slowly. 3. Stop the engine, then remove the key from the starting switch. 4. Lock each control lever with the safety lock lever securely.
5. Lock the sliding door (cab specification) and covers with locks. 6. Put blocks under both ends of the tracks to prevent the machine from moving during transportation, and tie the machine down securely with chains or wire rope of suitable strength. Be particularly careful to fix the machine in position securely so that it does not slip to the side. 3-87