MACHINE OPERATIONS AND CONTROLS OPERATION 10.Check for damage or displaced window Check that there is no damage or displacement of the window. If any damage is found, replace with a new part. If the window comes out of position or breaks during operations, do not continue operations. Stop immediately and repair the window. 11.Checking and cleaning rear view mirror Check the rear view mirror for any abnormality, and replace it with a new one if it is damaged. Keep the mirror surface clean and adjust the angle so that the lower, rear part of the machine (a portion whose view is blocked by the engine hood) can be seen from the operator's seat.
12.Seat belt and mounting clamps Check that there is no abnormality in the seat belt or mounting clamps. If there is any damage, replace with new parts. 13.Check bucket with hook (if equipped) for damage. Check that there is no damage to the hook, guide, or hook mount. If any abnormality is found, please contact your Komatsu distributor for repair. 3-32