11. Install the center console; then install the driver and passenger seats making sure they are securely latched. Front Differential And Rear Drive/Differential Gear Lubricant (Inspecting/Changing) Inspect and change the gear lubricant in each according to the Maintenance Schedule. When changing the lubricant, use the appropriate hypoid oil and use the following procedure. CF106A 4. After all the oil has been drained, install the drain plugs and tighten to 45 in.-lb. 1. Place the vehicle on level ground. 2. Remove each oil fill plug. Inspect the oil for any signs of metal filings or water. If found, take the vehicle to an authorized Arctic Cat dealer for servicing. CAUTION 5.
Pour recommended oil into each fill hole. PR064A PR065A 3. Drain the oil into a drain pan by removing in turn the drain plug from each. CF127 1. Check the brake fluid level in the brake fluid reservoir. The fluid level must be maintained between the MAX and MIN level marks. If the level in the reservoir is low, add DOT 4 brake fluid. CF107A 41 6. Install the fill plugs and tighten to 16 ft-lb. Hydraulic Brake DIVISION II - OPERATION/ MAINTENANCE ! WARNING Be sure to inspect the hydraulic brake system before each use. Always maintain brakes according to the Maintenance Schedule.