. SAFETY GENERAL PRECAUTIONS operator's seat (such as when or roof window, or when equipment completely to the position accidentally touch the levers a hazard that the machine serious injury or property lower the work equipment Use the key to lock all the 2 - 13 KEEP MACHINE CLEAN If water gets into the electrical sys tem, there is a hazard that it will cause malfunctions or misoperation. Do not us e water or steam to wash the el ectrical system (sensors, connectors). arried out when the machine a hazard that you will slip and your eyes. Always keep the If i nspection and maintenance is c is still dirty with mud or oil, there is fall, or that dirt or mud will get into machine clean.
is still dirty with mud or oil, there is fal KEEP OPERATOR'S COMPARTMENT CLEAN partment, always remove all mud and oil from the soles of your shoes. When entering the operator's com partment, always remove all mud and oil from the sol If y ou operate the pedal with mud or oil affixed to your shoes, your foot may slip and this may cause a serious round the operator's compartment. indow glass. Suction pads act as a lens and may cause fire. ide the operator's compartment when driving or operating the machine. ts such as flammable or explosive items into the operator's compartment. is may cause a serious accident.
Do not leave parts or tools lying a Do not stick suction pads to the w indow glass. Suction pads act as a lens and may cau Do not use cellular telephones ins ide the operator's compartment when driving or oper Never bring any dangerous objec ts such as flammable or explosive items into the oper LEAVING OPERATOR'S SEAT WITH Before standing up from the op opening or closing the front wind removing or installing the bottom w operator's seat), lower the work ground, set safety lock lever (1) s (L) , then stop the engine. If you when they are not locked, there i ma (F): F (L): L completely to the ground, set lock l position, then stop the engine. equipment. Always remove the ke in