Section 0 - Engine Disassembly and Assembly - Group 00 Engine Assembly (0-02) M11 Page 0-139 Use high temperature anti-seize compound, Part No. 3823097 or equivalent, to coat the capscrew threads, this will aid future capscrew removal. Install the exhaust manifold with twelve capscrews (M10- 1.50 x 100) and tubular spacers. Tighten the capscrews in the sequence shown. Torque Value: Step 1 - 27 [20 ft-lb] 2 - 47 [35 ft-lb] Air Intake Manifold - Installation Install two guide pins, Part No. 3376696, into the rocker lever housing. Install a new gasket. Install the intake manifold. Install the front lifting bracket using three capscrews (M10- 1.50 x 50) in locations 17, 20 and 21.
Install one capscrews (M10-1.50 x 48) capscrew in location 13. Install the two sensor harness wire clamps at locations 18 and 24. Tighten the capscrews in the sequence shown. Install the remaining capscrews (M10-1.50 x 40). Torque Value: 47 [35 ft-lb]