Camshaft Bushing - Replacement (1-03) Section 1 - Cylinder Block - Group 01 M11 Page 1-20 Camshaft Bushing Inside Diameter - Measurement Measure the inside diameter of the camshaft bushings when installed. Camshaft Bushing I.D. Installed mm in 72.078 MIN 2.8377 72.142 MAX 2.8402 NOTE: If one of the bushings exceeds the maximum speci- fications, all bushings must be replaced. Camshaft Bushing - Replacement (1-03) Removal Use the camshaft bushing driver, Part No. 3376070, bush- ing driver assembly, Part No. 3376637, and the guide, Part No. 3376069, to remove the camshaft bushings. Remove the number one bushing first. Remove the six remaining bushings.
Cleaning Use fine emery cloth to remove burrs and sharp edges from the camshaft bores.