Rocker Lever Assembly - Rebuild (3-02) Section 3 - Rocker Levers - Group 03 M11 Page 3-10 Use solvent to clean the parts. Dry with compressed air. Use compressed air to make sure the oil passages are not blocked. Inspection Visually inspect the adjusting screws and locknuts for damaged threads. Visually inspect the adjusting screws for wear on the ball end. Visually inspect the adjusting screw threads in the rocker levers for damaged threads. Visually inspect the rocker levers for loose rivets. Use crack detection kit, Part No. 3375432, to inspect the rocker levers and rocker lever shaft supports for cracks. Use crack detection cleaner, Part No.
3375433, to clean the rocker levers and shaft supports. Dry with compressed air. Use crack detection penetrant, Part No. 3375435, to spray the rocker levers and shaft supports. NOTE: Do not dry with compressed air. Allow the penetrant to dry for 15 minutes. Remove the excess penetrant with a dry cloth.