Cam Follower Assembly (04-01) Section 4 - Cam Follower Assembly - Group 04 M11 Page 4-6 Measure the cam follower roller side clearance. Roller Side Clearance mm in 0.19 MIN 0.007 0.65 MAX 0.026 If the roller side clearance is not within these specificatins, the roller must be replaced. Refer to Cam Follower Lever - Roller Replacement (4-03). Use a dial indicator to measure the cam follower roller to pin clearance. Roller to Pin Clearance mm in 0.08 MIN 0.003 0.20 MAX 0.008 NOTE: If the roller to pin clearance is not within these speci- fications, the roller and pin must be replaced. Refer to Cam Follower Lever - Roller Replacement (4-03).
Use clean 15W-40 oil to check the oil flow through the cam followers. Visually inspect the cam follower shaft supports for cracks or damage. If cracks or damage is found, the shaft supports must be replaced.