Fan Hub (Belt Driven) - Rebuild (8-04) Section 8 - Cooling System - Group 08 M11 Page 8-32 Measure the distance between the fan hub mounting faces. Face to Face Distance mm in 73.4 MIN 2.890 74.0 MAX 2.913 Install the fan hub in a vise with the fan mounting flange facing up. Install the flat washer and the (M10-1.50 x 25) capscrew. Torque Value: 61 [45 ft-lb] Install the fan hub in a vise so the shaft end clearance can be measured. Shaft End Clearance mm in 0.076 MIN 0.0030 0.406 MAX 0.0160 If the shaft end clearance is not within the specifications, disassemble and inspect for incorrect assembly. Use a leather hammer to install the cover. Do not hit in the center of the cover.