Section 0 - Engine Disassembly and Assembly - Group 00 Engine Disassembly (0-01) M11 Page 0-21 Water Filter Head - Removal Remove the three capscrews, filter head and the two o-rings. Water Header Plate - Removal Remove capscrews (1) and (2), and install two guide pins, Part No. 3376488. Remove the remaining capscrews beginning at the ends and moving toward the center of the plate. Caution: Care must be taken to ensure no surface scratches occur on the water header plate or cylinder block mounting surfaces. Scratches on these surfaces will cause future leak paths. Remove the water header plate, gasket and guide pins.
Hand Hole Cover and Dipstick Tube Bracket - Removal Remove the four capscrews (1), the dipstick tube bracket and gasket. Remove the four capscrews (2), the hand hole cover and gasket. Turbocharger Oil Drain Connection - Removal Remove the turbocharger oil drain tube connection fitting from the side of the cylinder block.