Section 14 - Engine Testing - Group 14 Engine Dynamometer - Install Engine (14-01) M11 Page 14-31 Connect the keyswitch panel datalink cable to the Compulink™. Depress the ‘‘POWER button on the Compulink™. If the ‘‘Progressive Shift Feature’’ is turned ‘‘ON’’, it must be turned during the engine test to allow the engine to accelerate through its RPM range. Select the ‘‘Adjustments’’ option from the main menu screen by depressing the number ‘‘2’’ on the Compulink™ keypad. Select the ‘‘Feature Selection’’ from the menu options by depressing the number on the keypad. NOTE: If the password procedure has not been disabled, a password must be entered before any features can be changed.
Enter the master password, user password or ECM password depending on which password is enabled. Refer to the CELECT™Compulink™Cartridge Manual, Bul- letin No. 3810472, for instructions to enter a password. The next screen will show if the ‘‘Progressive Shift Fea- is turned or Check the ‘‘Progressive Shift Feature’’. If is dis- played, depress the number key on the keypad to display and turn off the ‘‘Progressive Shift’’. NOTE: Turn the ‘‘Progressive Shift Feature’’ back to ‘‘ON’’ when the test is completed.