Engine Disassembly (0-01) Section 0 - Engine Disassembly and Assembly - Group 00 M11 Page 0-24 Remove the six ECM mounting capscrews, star washers and the ECM. Electronic Control Cooling Plate - Removal Remove the four mounting capscrews, the electronic con- trol cooling plate and the mounting brackets. Starting Motor - Removal The component weighs 23 kg [50 lb] or more. To avoid personal injury, use a hoist or get assistance to lift the component. The starter mounting capscrews can be one of several different sizes. These sizes could be in metric or U.S. Customary. Use the correct wrench size to avoid damage to the capscrews. Remove the three capscrews and the starting motor.
Air Compressor Air Supply Tube - Removal Remove the capscrew (1), loosen the two hose clamps (2) and remove the tube.