Engine Painting (14-06) Section 14 - Engine Testing - Group 14 M11 Page 14-50 Engine Painting (14-06) Remove all belts from the engine. Cover the following: Exhaust and intake openings Electrical components Fuel inlet and drain connections Any exposed fittings, threads and electrical wire terminals Warning: When using a steam cleaner, wear protective clothing and safety glasses or a face shield. Hot steam will cause serious personal injury. Use steam to clean the engine. Dry with compressed air. NOTE: Make sure all engine surfaces are clean and dry before painting the engine. Cover the following:
All dataplates Valve and injector set marks Exhaust manifold Turbocharger turbine housing Flywheel Flywheel housing transmission mounting surface Paint the engine.