Engine Disassembly (0-01) Section 0 - Engine Disassembly and Assembly - Group 00 M11 Page 0-26 Air Compressor Coolant Tubes - Removal Remove the inlet tube (1) and fitting (2). Remove the outlet tube clamp capscrew (3) and the tube. Hand Hole Cover (Fuel Pump Side) - Removal Remove the four capscrews, the cover and gasket. Hydraulic Pump or Cover - Removal Remove the two capscrews, the pump and gasket. Hydraulic Pump Drive - Removal Remove the three pump drive adapter mounting capscrews. Install a slide hammer and the engine barring tool, Part No. 3824270, to the hydraulic drive adapter. Use two (M10-1.50 x 30) capscrews, Part No. 3335003, for SAE "A" drives.
Use two (M12-1.75 x 40) capscrews, Part No. 3018671, for SAE "B" drives.