Cylinder Block - Rebuild Section V - Specifications - Group 18 Page V-26 M11 Component or Assembly (Procedure) Ref.No./Steps Metric U.S. Cylinder Block - Torque Values Main Bearing Capscrews 1 68 50 ft-lb Note: Tighten the main bearing capscrews 2 142 105 ft-lb in the sequence shown. 3 210 155 ft-lb 4 Loosen All 5 68 50 ft-lb 6 142 105 ft-lb 7 210 155 ft-lb Connecting Rod Capscrews 1 68 50 ft-lb 2 142 105 ft-lb 3 210 155 ft-lb 4 Loosen All 5 68 50 ft-lb 6 142 105 ft-lb 7 210 155 ft-lb Cylinder Block Pipe Plugs Refer to ‘‘Pipe Plug Torque Value Table’’ at the rear of this section for torque value of various plug sizes.
Cam Follower Studs 34 25 ft-lb Viscosity Sensor 24 18 ft-lb Cylinder Head - Rebuild Specifications Cylinder Head Flatness AA and BB (Corner to Corner) 0.200 MAX 0.008 CC (Across Combustion Face) 0.076 MAX 0.003 DD (Across Entire Head Surface) 0.127 MAX 0.005 Note: Dimensions CC and DD must be checked from front to rear of head. Cylinder Head Thickness 99.24 mm MIN 3.907 in 100.25 mm MAX 3.947 in