Section V - Specifications - Group 18 Cylinder Block - Rebuild M11 Page V-33 Component or Assembly (Procedure) Ref.No./Steps Metric U.S. Injectors - Rebuild Specifications CELECT™injectors cannot presently be rebuilt. Lubricating Oil System - Specifications Oil Pan Capacity: Automotive 26.5 litres Low 7.0 gal. 34.0 litres High 9.0 gal. Lubricating Oil Thermostat Initial Opening Temperature 106°C MIN 223°F 108°C MAX 227°F Fully Open Temperature 115°C MAX 240°F Maximum Opening Distance 6.35 mm MAX 0.250 in Lubricating Oil Filter Head Bypass Valve Spring:
Free Length 37.68 mm MIN 1.483 in 38.52 mm MAX 1.517 in Load at 29.65 mm [1.167 inch] 110.1 N MIN 24.751 lbf 121.7 N MAX 27.359 lbf Lubricating Oil Pump Shaft End Clearance 0.064 mm MIN 0.0025 in 0.269 mm MAX 0.0106 in Lubricating Oil Pump Body and Cover Shaft Bore I.D. 18.720 mm MIN 0.7370 in 18.746 mm MAX 0.7380 in Lubricating Oil Pump Gear Shaft O.D. 18.669 mm MIN 0.7350 in 18.681 mm MAX 0.7355 in