Section 0 - Engine Disassembly and Assembly - Group 00 Engine Disassembly (0-01) M11 Page 0-35 Crankshaft Rear Oil Seal - Removal Remove the 12 capscrews and clamping ring (1), Use a heal bar to remove the oil seal (3) and dust seal (2) together. Remove the gasket (4). Flywheel Housing - Removal Remove the capscrews and both rear engine mounts. Remove capscrews (1) and (2) and install two flywheel housing guide pins, Part No. 3376697. The component weighs 23 kg [50 lb] or more. To avoid personal injury, use a hoist or get assistance to lift the component. Remove the remaining 12 capscrews and the flywheel housing. Use a mallet to loosen the housing if it is stuck. Remove the guide pins.
Flywheel Housing, REPTO - Removal Remove the REPTO oil supply line from the flywheel housing and the oil galley connection.