Section 0 - Engine Disassembly and Assembly - Group 00 Engine Disassembly (0-01) M11 Page 0-41 Install camshaft installation pilot, Part No. 3376388. 1. Install the expander (1), Part No. 3376923, in the cam- shaft through the rear cover plate opening. 2. Turn the screw inside the expander clockwise to ex- pand the swell plug. 3. Install the arbor sleeve (2) over the expander. 4. Install the locating pilot extensions (3) to the expander. Use one hand to slowly rotate and pull the camshaft from the cylinder block and the other hand to balance the camshaft as it is removed. Remove the camshaft pilot tool. Gear Housing - Removal Remove the gear housing mounting capscrews and the housing.
Remove the rectangular seal from the back side of the housing.